Across-task binding: The development of a representation in learning a continuous movement sequence.

Across-task binding is defined as the stimulus/response of one task being linked to the response of another task. The purpose of the present experiment was to determine across-task binding in a continuous movement sequence task with an auditory task of high and low pitch tones and the development of a movement sequence representation. According to the two systems theory of sequence learning, we expected that the developed representation in the across-task binding context relies on the multi-dimensional system rather than on the unidimensional system which is restricted to a set of modules where each module processed information along one task/dimension. An inter-manual transfer design was used to disentangle the sequence representations. The mirror transfer test required the same pattern of muscle activation and joint angles (motor coordinates) in the contralateral limb as experienced during the acquisition phase, while in the non-mirror transfer test, the visual-spatial locations (spatial coordinates) of the target waveform were reinstated. The main finding was that consistently combining visual-spatial positions in a sequence and auditory dimensions such as the tone pitch does not rely on a multidimensional system as predicted by the two-systems theory.

A Hybrid Volume-Surface Integral Equation Method for Rapid Electromagnetic Simulations in MRI.

OBJECTIVE: We developed a hybrid volume surface integral equation (VSIE) method based on domain decomposition to perform fast and accurate magnetic resonance imaging (MRI) simulations that include both remote and local conductive elements. METHODS: We separated the conductive surfaces present in MRI setups into two domains and optimized electromagnetic (EM) modeling for each case. Specifically, interactions between the body and EM waves originating from local radiofrequency (RF) coils were modeled with the precorrected fast Fourier transform, whereas the interactions with remote conductive surfaces (RF shield, scanner bore) were modeled with a novel cross tensor train-based algorithm. We compared the hybrid-VSIE with other VSIE methods for realistic MRI simulation setups. RESULTS: The hybrid-VSIE was the only practical method for simulation using 1 mm voxel isotropic resolution (VIR). For 2 mm VIR, our method could be solved at least 23 times faster and required 760 times lower memory than traditional VSIE methods. CONCLUSION: The hybrid-VSIE demonstrated a marked improvement in terms of convergence times of the numerical EM simulation compared to traditional approaches in multiple realistic MRI scenarios. SIGNIFICANCE: The efficiency of the novel hybrid-VSIE method could enable rapid simulations of complex and comprehensive MRI setups.

Automated Force-Coupled Ultrasound Method for Calibration-Free Carotid Artery Blood Pressure Estimation.

We develop, automate and evaluate a calibration-free technique to estimate human carotid artery blood pressure from force-coupled ultrasound images. After acquiring images and force, we use peak detection to align the raw force signal with an optical flow signal derived from the images. A trained convolutional neural network selects a seed point within the carotid in a single image. We then employ a region-growing algorithm to segment and track the carotid in subsequent images. A finite-element deformation model is fit to the observed segmentation and force via a two-stage iterative non-linear optimization. The first-stage optimization estimates carotid artery wall stiffness parameters along with systolic and diastolic carotid pressures. The second-stage optimization takes the output parameters from the first optimization and estimates the carotid blood pressure waveform. Diastolic and systolic measurements are compared with those of an oscillometric brachial blood pressure cuff. In 20 participants, average absolute diastolic and systolic errors are 6.2 and 5.6 mm Hg, respectively, and correlation coefficients are r = 0.7 and r = 0.8, respectively. Force-coupled ultrasound imaging represents an automated, standalone ultrasound-based technique for carotid blood pressure estimation, which motivates its further development and expansion of its applications.

Compression of volume-surface integral equation matrices via Tucker decomposition for magnetic resonance applications.

In this work, we propose a method for the compression of the coupling matrix in volume-surface integral equation (VSIE) formulations. VSIE methods are used for electromagnetic analysis in magnetic resonance imaging (MRI) applications, for which the coupling matrix models the interactions between the coil and the body. We showed that these effects can be represented as independent interactions between remote elements in 3D tensor formats, and subsequently decomposed with the Tucker model. Our method can work in tandem with the adaptive cross approximation technique to provide fast solutions of VSIE problems. We demonstrated that our compression approaches can enable the use of VSIE matrices of prohibitive memory requirements, by allowing the effective use of modern graphical processing units (GPUs) to accelerate the arising matrix-vector products. This is critical to enable numerical MRI simulations at clinical voxel resolutions in a feasible computation time. In this paper, we demonstrate that the VSIE matrix-vector products needed to calculate the electromagnetic field produced by an MRI coil inside a numerical body model with 1 mm3 voxel resolution, could be performed in ~ 33 seconds in a GPU, after compressing the associated coupling matrix from ~ 80 TB to ~ 43 MB.

Magnetic-Resonance-Based Electrical Property Mapping Using Global Maxwell Tomography With an 8-Channel Head Coil at 7 Tesla: A Simulation Study.

OBJECTIVE: Global Maxwell Tomography (GMT) is a recently introduced volumetric technique for noninvasive estimation of electrical properties (EP) from magnetic resonance measurements. Previous work evaluated GMT using ideal radiofrequency (RF) excitations. The aim of this simulation study was to assess GMT performance with a realistic RF coil. METHODS: We designed a transmit-receive RF coil with 8 decoupled channels for 7T head imaging. We calculated the RF transmit field ( B1+) inside heterogeneous head models for different RF shimming approaches, and used them as input for GMT to reconstruct EP for all voxels. RESULTS: Coil tuning/decoupling remained relatively stable when the coil was loaded with different head models. Mean error in EP estimation changed from [Formula: see text] to [Formula: see text] and from [Formula: see text] to [Formula: see text] for relative permittivity and conductivity, respectively, when changing head model without re-tuning the coil. Results slightly improved when an SVD-based RF shimming algorithm was applied, in place of excitation with one coil at a time. Despite errors in EP, RF transmit field ( B1+) and absorbed power could be predicted with less than [Formula: see text] error over the entire head. GMT could accurately detect a numerically inserted tumor. CONCLUSION: This work demonstrates that GMT can reliably reconstruct EP in realistic simulated scenarios using a tailored 8-channel RF coil design at 7T. Future work will focus on construction of the coil and optimization of GMT's robustness to noise, to enable in-vivo GMT experiments. SIGNIFICANCE: GMT could provide accurate estimations of tissue EP, which could be used as biomarkers and could enable patient-specific estimation of RF power deposition, which is an unsolved problem for ultra-high-field magnetic resonance imaging.

Noninvasive Estimation of Electrical Properties From Magnetic Resonance Measurements via Global Maxwell Tomography and Match Regularization.

OBJECTIVE: In this paper, we introduce global Maxwell tomography (GMT), a novel volumetric technique that estimates electric conductivity and permittivity by solving an inverse scattering problem based on magnetic resonance measurements. METHODS: GMT relies on a fast volume integral equation solver, MARIE, for the forward path, and a novel regularization method, match regularization, designed specifically for electrical property estimation from noisy measurements. We performed simulations with three different tissue-mimicking numerical phantoms of different complexity, using synthetic transmit sensitivity maps with realistic noise levels as the measurements. We performed an experiment at 7 T using an eight-channel coil and a uniform phantom. RESULTS: We showed that GMT could estimate relative permittivity and conductivity from noisy magnetic resonance measurements with an average error as low as 0.3% and 0.2%, respectively, over the entire volume of the numerical phantom. Voxel resolution did not affect GMT performance and is currently limited only by the memory of the graphics processing unit. In the experiment, GMT could estimate electrical properties within 5% of the values measured with a dielectric probe. CONCLUSION: This work demonstrated the feasibility of GMT with match regularization, suggesting that it could be effective for accurate in vivo electrical property estimation. GMT does not rely on any symmetry assumption for the electromagnetic field, and can be generalized to estimate also the spin magnetization, at the expense of increased computational complexity. SIGNIFICANCE: GMT could provide insight into the distribution of electromagnetic fields inside the body, which represents one of the key ongoing challenges for various diagnostic and therapeutic applications.

Adoecimento bancário: construção de estratégias individuais e coletivas para o enfrentamento do desgaste mental relacionado ao trabalho / Bank workers' mental strain: building confrontation strategies

Resumo Este relato visa apresentar e discutir o embasamento, o desenvolvimento e os resultados de um grupo de enfrentamento organizado com trabalhadores bancários adoecidos. A atividade foi realizada pelo Núcleo de Ação em Saúde do Trabalhador (NAST), em parceria com o Sindicato dos Bancários de Limeira. Partindo da trajetória profissional dos trabalhadores, o objetivo foi o de problematizar as características da organização do trabalho contemporâneo nesse setor. O grupo realizou oito encontros de aproximadamente duas horas na sede do sindicato, em Limeira. Nos encontros, os trabalhadores relataram situações laborais adversas determinantes no processo saúde-doença. Grande parte das queixas dos trabalhadores estava relacionada ao desgaste mental ocasionado pela pressão sofrida para alcançar metas superdimensionadas, levando ao estresse -, dentre outras formas de adoecimento -, inclusive pela falta de reconhecimento por parte dos gestores e usuários da instituição. O grupo se mostrou dispositivo potente de enfrentamento e ferramenta importante ao dar espaço de voz para trabalhadores se articularem na construção de estratégias individuais e coletivas para promoção da saúde no local de trabalho.

Abstract This report aims to present and discuss the basis, development and results of a support group constituted with sick bank workers. The activity was carried out by the Núcleo de Ação em Saúde do Trabalhador - NAST (Workers' Health Action Center) in partnership with the Bank Workers' Union of Limeira, state of São Paulo, Brazil. Starting from the workers' professional life, the objective was to query the current labor organization in this sector. The group held eight meetings of approximately two hours each at the union headquarters in Limeira. During the meetings, workers reported adverse work situations that were determinant in their health-disease process. Most of the workers' complaints were related to the mental strain caused by pressure to achieve oversized goals, and by the lack of recognition by the institution managers and users. The support group proved to be a powerful confrontation device and an important tool in providing a voice space for workers to articulate the construction of individual and collective strategies for health promotion in the workplace.

Computation of ultimate SAR amplification factors for radiofrequency hyperthermia in non-uniform body models: impact of frequency and tumour location.

PURPOSE: We introduce a method for calculation of the ultimate specific absorption rate (SAR) amplification factors (uSAF) in non-uniform body models. The uSAF is the greatest possible SAF achievable by any hyperthermia (HT) phased array for a given frequency, body model and target heating volume. METHODS: First, we generate a basis-set of solutions to Maxwell's equations inside the body model. We place a large number of electric and magnetic dipoles around the body model and excite them with random amplitudes and phases. We then compute the electric fields created in the body model by these excitations using an ultra-fast volume integral solver called MARIE. We express the field pattern that maximises the SAF in the target tumour as a linear combination of these basis fields and optimise the combination weights so as to maximise SAF (concave problem). We compute the uSAFs in the Duke body models at 10 frequencies in the 20-900 MHz range and for twelve 3 cm-diameter tumours located at various depths in the head and neck. RESULTS: For both shallow and deep tumours, the frequency yielding the greatest uSAF was ∼900 MHz. Since this is the greatest frequency that we simulated, we hypothesise that the globally optimal frequency is actually greater. CONCLUSIONS: The uSAFs computed in this work are very large (40-100 for shallow tumours and 4-17 for deep tumours), indicating that there is a large room for improvement of the current state-of-the-art head and neck HT devices.

The ultimate signal-to-noise ratio in realistic body models.

PURPOSE: We compute the ultimate signal-to-noise ratio (uSNR) and G-factor (uGF) in a realistic head model from 0.5 to 21 Tesla. METHODS: We excite the head model and a uniform sphere with a large number of electric and magnetic dipoles placed at 3 cm from the object. The resulting electromagnetic fields are computed using an ultrafast volume integral solver, which are used as basis functions for the uSNR and uGF computations. RESULTS: Our generalized uSNR calculation shows good convergence in the sphere and the head and is in close agreement with the dyadic Green's function approach in the uniform sphere. In both models, the uSNR versus B0 trend was linear at shallow depths and supralinear at deeper locations. At equivalent positions, the rate of increase of the uSNR with B0 was greater in the sphere than in the head model. The uGFs were lower in the realistic head than in the sphere for acceleration in the anterior-posterior direction, but similar for the left-right direction. CONCLUSION: The uSNR and uGFs are computable in nonuniform body models and provide fundamental performance limits for human imaging with close-fitting MRI array coils. Magn Reson Med 78:1969-1980, 2017. © 2016 International Society for Magnetic Resonance in Medicine.

Fast Electromagnetic Analysis of MRI Transmit RF Coils Based on Accelerated Integral Equation Methods.

A fast frequency domain full-wave electromagnetic simulation method is introduced for the analysis of MRI coils loaded with the realistic human body models. The approach is based on integral equation methods decomposed into two domains: 1) the RF coil array and shield, and 2) the human body region where the load is placed. The analysis of multiple coil designs is accelerated by introducing the precomputed magnetic resonance Green functions (MRGFs), which describe how the particular body model used responds to the incident fields from external sources. These MRGFs, which are precomputed once for a given body model, can be combined with any integral equation solver and reused for the analysis of many coil designs. This approach provides a fast, yet comprehensive, analysis of coil designs, including the port S-parameters and the electromagnetic field distribution within the inhomogeneous body. The method solves the full-wave electromagnetic problem for a head array in few minutes, achieving a speed up of over 150 folds with root mean square errors in the electromagnetic field maps smaller than 0.4% when compared to the unaccelerated integral equation-based solver. This enables the characterization of a large number of RF coil designs in a reasonable time, which is a first step toward an automatic optimization of multiple parameters in the design of transmit arrays, as illustrated in this paper, but also receive arrays.

General design approach and practical realization of decoupling matrices for parallel transmission coils.

PURPOSE: In a coupled parallel transmit (pTx) array, the power delivered to a channel is partially distributed to other channels because of coupling. This power is dissipated in circulators resulting in a significant reduction in power efficiency. In this study, a technique for designing robust decoupling matrices interfaced between the RF amplifiers and the coils is proposed. The decoupling matrices ensure that most forward power is delivered to the load without loss of encoding capabilities of the pTx array. THEORY AND METHODS: The decoupling condition requires that the impedance matrix seen by the power amplifiers is a diagonal matrix whose entries match the characteristic impedance of the power amplifiers. In this work, the impedance matrix of the coupled coils is diagonalized by a successive multiplication by its eigenvectors. A general design procedure and software are developed to generate automatically the hardware that implements diagonalization using passive components. RESULTS: The general design method is demonstrated by decoupling two example parallel transmit arrays. Our decoupling matrices achieve better than -20 db decoupling in both cases. CONCLUSION: A robust framework for designing decoupling matrices for pTx arrays is presented and validated. The proposed decoupling strategy theoretically scales to any arbitrary number of channels. Magn Reson Med 76:329-339, 2016. © 2015 Wiley Periodicals, Inc.

Uncertainty quantification of silicon photonic devices with correlated and non-Gaussian random parameters.

Process variations can significantly degrade device performance and chip yield in silicon photonics. In order to reduce the design and production costs, it is highly desirable to predict the statistical behavior of a device before the final fabrication. Monte Carlo is the mainstream computational technique used to estimate the uncertainties caused by process variations. However, it is very often too expensive due to its slow convergence rate. Recently, stochastic spectral methods based on polynomial chaos expansions have emerged as a promising alternative, and they have shown significant speedup over Monte Carlo in many engineering problems. The existing literature mostly assumes that the random parameters are mutually independent. However, in practical applications such assumption may not be necessarily accurate. In this paper, we develop an efficient numerical technique based on stochastic collocation to simulate silicon photonics with correlated and non-Gaussian random parameters. The effectiveness of our proposed technique is demonstrated by the simulation results of a silicon-on-insulator based directional coupler example. Since the mathematic formulation in this paper is very generic, our proposed algorithm can be applied to a large class of photonic design cases as well as to many other engineering problems.